HO Studley

Workbench Wednesday – #12 (2015) Studley Replica (Top) Construction

The main point of this bench was to replicate Studley’s construction of the top for display at the 2015 exhibit of the HO Studley collection in Cedar Rapids, concurrent with the 2015 Handworks event in nearby Amana IA.  I had to guess at the details of the actual construction of the top since the owner of the Studley collection would not allow me to take a large core sample or cut a chunk out of the original workbench top.

 

Being limited to the observations I noted last week I charged ahead  The white oak I’d purchased from Jameel’s supplier was about the hardest stuff I have ever worked, it was rosewood hard.  After coaxing it through my lunchbox planer I assembled the two core  lamina using PVA glue and decking screws with washers.  Assembling laminate structures in this manner was a technique from four decades ago during my time in the foundry pattern shop where we glued and screwed or nailed everything together so we didn’t have to use clamps.  When it came time to sculpt the pattern for the molders on the foundry  floor we went back and removed all the metal fasteners first.

I repeated the procedure for the underside face of the bench.  C’mon, it was the underside.  Who cares if there were dozens of screw holes?  I know I certainly did not.

The show face consumed pretty much every clamp I owned in order to avoid the screw holes.  In the end I had a terrific flat and stable slab, just like Ol’ Henry did.  He was right about that, too.