Classes

Knotwork Banding Workshop – Day 2

The day began with the unveiling of the parquetry backgrounds glued up just before stopping yesterday.  A bit of water on a sponge allowed the paper backing to be removed easily and quickly.  The hot hide glue had congealed nicely but was still pretty green so we placed them in front of a fan to help dry faster.

Then it was on to trimming edges, laying out the knotwork inlay and excavating the channels for the banding.

Much of the incising as done with utility knives, but Brint in particular took a liking to my shoulder knives.  He gave both of them a long test drive and had definite preferences for them.  So much so that he encouraged me to have a workshop next summer to allow the participants to make one (or two).  We will get together over the winter to work out any bugs for that workshop.

Meanwhile I was noodling around and found a donkey-dumb simple way to lay out the knotwork pattern with pieces of the banding itself as the measuring devices.  Palm meet forehead.

For Brint and John, once the excavations were far enough along it was time to create the template block for the individual pieces of the composition.

Following the guide of Roubo they took blocks of walnut and created right-angle and 45-degree channels for the banding to be sawn and planed, then placed pieces of the banding as stop blocks in the channels.  This allows for limitless production of identical elements and very fast work in creating the knotwork pattern.

And knotwork corners became manifest on the boards.

Thus endeth Day 2.